GODEX 2200 DRIVER
Table of Contents Add to my manuals Add. Remove the Rewinder Option Cover Plate. Place the printer onto a smooth surface, and open the top cover. After the paper jam is cleared, power on the printer, and the cutter blade will go back to its original position. Page 21 Cable Configuration Holes. Please check the specific print mode, then go into the Setting Mode after power on the printer. Flip the Label Feed Guide back down to its original position, and clip the guide in position.
|Date Added:||18 September 2017|
|File Size:||68.94 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Use the flat tip screwdriver to loosen the TPH screws A on each side of the print gosex counterclockwise for one circle as indicated by the Open the Top Cover of the printer, and turn the printer sideways.
Pressure Adjustment Pressure Adjustment 1. Use a flat tip screwdriver as shown in the photoand turn the screws B clockwise to move the TPH The USB device is built on the serial goodex, therefore make sure the interface setting is specified to the assigned port. Backlit graphics LCD display: Screw the Cutter Cover onto the cutter kit. Remove the two screws in the front.
ogdex Remove the Bottom Front Cover. Align the label roll with the Label Width Guide. Once the USB cable is connected from PC to the printer, PC will automatically detect the new device and begin the installation process.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
GODEX / Plus Barcode Printer
Liner Rewind Sensor and the printer will stop printing until godeex has been removed from the printer. Printing mechanism of a unique design provides quick and easy labels and ribbons loading in the printer.
This manual also for: Open the top cover.
The Self-Test function in a printer will help the user to troubleshoot whether the printer is operating normally. Power on the PC.
Godex EZ Plus label printing machine | TEA Industrial Adhesives
Place the printer onto a smooth surface, and open the top cover. Maintenance and Adjustment Rolls of ribbon up to m length can be used with any type of winding coloring layer inside or outside. Table of Contents Add to my manuals Add. One side of the printout not being printed clearly or ribbon wrinkle occurs, adjust the TPH Spring Box position or gosex to cure the problem.
Barcode Printer Chapter 1. Ribbon Tension Adjustment 2. At the same time they can be printed without computer. Maintenance And Adjustment Chapter 5.
Godex EZ-2200 User Manual
Please fodex the specific print mode, then go into the Setting Mode after power on the printer. Printer Parts Please use the following diagrams to identify each printer part. Don’t have an account? Page 19 Liner Rewind Sensor and the printer will stop printing until liner has been removed from the printer. Pressing the Pause key while printing, printer will pause the print job, when the Pause key is pressed one more time, the printer will continue with the rest of the print job.
Label gap and black mark sensing. Remove the Rewinder Option Cover Plate. 220 Of Contents 1. Close the top cover to complete the ribbon installation.